Gold And Diamond - Blog
America's Leading Online Jewelry Store
Did you know that you can make your jewelry using the gemstones lying around your house? The process below covers the steps involved in soldering gemstones to create a necklace full of gems. Before you begin, set up a safe soldering space. Usually, you need a large ceramic tile or any heat-resistant pad. It would help if you also had an overhead lamp for proper lighting.
Also, make sure the area is well-ventilated.
What You Need
- Jump rings
- Copper tape
- Soldering iron
The Soldering Process
Step 1: Prepare Your Gemstone
Start by arranging the gemstones in any design you like. Using the copper tape, create caps on the gem. The caps are what the solder is going to adhere to. You can use an all-purpose cleaner to clean the stone, so the copper tape can be tight enough.
Make sure there is sufficient space for the solder to adhere to.
Step 2: Warm the Soldering Iron
Heat the soldering iron and then cover the tip with solder. Place the caps on the stones next to each other and then solder the stones by running the hot iron along the caps' seams. Create a seal by melting some of the solder along the seam.
Use a good amount of solder to ensure a strong hold when attaching the pieces of gemstones.
Step 3: Solder the Jump Ring
Once again, coat the iron's tip with solder and run the soldering iron's tip along the jump ring's bottom edge. Use the pair of pliers to hold the jump ring in position as you do this. Do this to the other jump ring on the opposite side of the pendant too.
Gently open the jump rings and then loop one of the chain links into the jump ring. Do not pry open the jump rings.
Use a pair of pliers to open the jump rings. Close the jump ring and repeat the above steps on the other side of the pendant.
Tips for A Flawless Finish
- Run the iron's tip on bumpy masses of solder to clean up the solder.
- For a polished look, cover the entire copper tape with solder.
So there you have it, your perfectly made necklace full of your favorite gemstones. You can follow the above procedure to create lovely jewelry pieces for your loved ones.
You can contact us to learn more about jewelry.
Most people love diamond earrings because of their versatility in usage and suitability for almost every occasion. However, is it safe to sleep in your diamond earrings? The answer is no. It would be best if you took off all jewelry before bedtime, including diamond earrings.
Why You Should Not Sleep With Diamond Earrings
Nevertheless, there is an exception to the rule, and this is when you get a new piercing. Other than that, it would be best if you took off your earrings before going to bed. Below are some of the problems you may encounter when you sleep in your diamond earrings.
It Is Uncomfortable
When it comes to sleep, comfort is vital. Sleeping in any jewelry, including earrings, denies you of the much-needed comfort during sleep. Can you imagine having to constantly turn because you feel something is pressing against your ear or side of the face? The discomfort will affect your sleep, so the best thing to do is remove your earring before sleeping.
Damaged Ear or Earrings
As you sleep, your earring is likely to get caught on your hair or bedding. Thus, as you move in bed, there are high chances that you will damage your earlobe and earring.
Diamond earrings are damaged when the earring settings become loose or when the earring bends. In case your diamond earrings have styles such as hoops or dangles, the damage can be worse.
Waking Up with a Headache
There is a great risk of waking up with a headache when you sleep in your diamond earrings. This risk is significantly higher when you sleep on your side. This is because your earring will be pressing against your head's side when you are sleeping.
If you have a new piercing and have to sleep with earrings, you can sleep on your back instead of your side.
Like any other jewelry, sleeping with diamond earrings is not recommended. The only time you can sleep in your earrings is when you have a fresh ear-piercing. Once your piercing is healed, you no longer need to sleep in your earrings.
You can contact us to learn more about jewelry.
The natural diamond boasts incredible durability, beauty, and elegance, making it a common material for jewelry. If you like earrings, you have probably thought of investing in the diamond earrings market. But are diamonds earrings worth it? The short answer is; it depends.
There are several factors that you should consider before you dive into this market. This guide discusses the basics of diamond earrings as a store of value to help you make an informed investment decision according to your needs. Read on!
Top Reasons to Invest In Diamond Earrings
The diamond jewelry market has been expanding over the years due to its appealing benefits. Here are top reasons why the diamond earrings market is worth your investment:
- Diamond cannot break or get worn out easily because of its durability nature
- Diamond prices tend to increase with time
- Diamond earrings are beautiful, and you can continue using them even as you keep them.
Factors to Keep In Mind Before You Invest In Diamond Earrings
Here are helpful tips to help you get the most of your diamond earrings investment:
Understand the Basics
Understand the different types of diamond earrings available in the market as well as their value. The colored diamonds are quite rare, but they hold high value than white diamonds. It will be easier for you to invest when you know the basics.
Create a Budget
How much do you wish to spend on the investment? As a rule of thumb, you should start slow and then increase your investment with time once your test the market.
Avoid buying diamond earrings of the same type. At least, you should invest in a different type of diamond jewelry to avoid risks if one of the investments goes south.
Diamond is one of the best precious metals to invest in today. If you like jewelry, follow the tips above to invest wisely in diamond jewelry. If you have any issues regarding the same, feel free to contact Gold and Diamond Source. We help aspiring diamond earrings investors to choose and invest in the right earrings. We will be glad to help you too!
For centuries, diamonds have held the title of a girl's best friend. These exquisite rocks have graced runways, galas, and everyday occasions, spicing up different outfits to create a statement look.
Jewelry enthusiasts consider diamond earrings the most wearable pieces of diamond jewelry. However, most of them have little to zero knowledge about how they are measured.
Let's look at how these beauties are measured to help you choose better on your next trip to the jeweler.
Dispelling The Diamond Size Myth
A diamond earring is measured in millimeters and carats. The total carats are not the size of the diamond as popular myths purport. A carat, or ct, is equivalent to 0.20 grams. The size of a diamond is measured in millimeters, length by width, which makes up the diamond's diameter and size. It takes about 250 tons of rock mining to produce a single carat diamond. That's why they are rare and pricey.
Common Diamond Earrings Weights and Sizes
The carat weight indicated on diamond earrings bears the weight of the pair and not just one of them. The individual carat weight of each earring is determined in millimeters.
A 0.25-carat diamond stud, for instance, has an average diameter of 4.1mm, which is relatively thin. However, if you had a 3- carat diamond earring, the diameter will be approximately 9.3mm, which is substantially bigger.
In a 2.00 carat pair, each diamond weighs 1.00 carat, with an average diameter of 6.5mm. For a 1.50 carat pair, each earring weighs 0.75 carat with an approximate diameter of 5.88millimeters.
Consider the Occasion to Match your Diamond Earring Size and Weight
Think about the occasion you'll wear your diamond earrings to before you buy them. For example, for a daily pair, choose stud earrings, which are typically between 0.25 and 1 carat.
1 carat diamond stud earrings are popular. This total weight includes two 0.50 carat diamonds. For a typical pair of round-cut diamond studs, each has a diameter of 5 millimeters.
Find Real Diamonds Online
At Gold and Diamond Source, we only sell real gold and diamond jewelry. Contact us to get the best jewelry deals in America.
Cobalt is one of the most valuable metals used in making wedding rings. At the same time, cobalt is very light, durable, and comfortable, making it excellent in making rings. Since the cobalt rings are sturdy and high resistant to scratching while remaining cost-friendly compared to metals like gold and platinum, now the question is, can you cut the ring?
What You Need To Know
Despite Cobalt rings being rigid and won't bend compared to other common metals used in making rings; Cobalt can effortlessly be cut using readily available cutting tools. For instance, should you find yourself in a pressing emergency, medical or not, cutting off the Cobalt shouldn't be a big problem. Emergency cutting tools can safely get rid of the ring.
What To Do To Avoid Cutting Your Ring
Cobalt is a popular alternative to traditional ring material, being a hypoallergenic material. Most people who have the ring do not experience any hypersensitive reaction, such as those experienced with Platinum and Gold wedding bands. The ring has a sleek cut and fine finish keeping its reflective white sheen without Rhodium Plating.
You can keep the ring's integrity by having it resized to ensure it never has to be cut off from the finger in case of an emergency. The ring can be resized outwards or inwards by half or to its full size. To resize the ring, send it back to your retailer, who will send it to an expert if they do not have an in-house professional jeweler.
Your favorite Cobalt rings will serve you for an extended period, while remaining hard to scratch or deform. When you have a solid reason that demands cutting the ring, you should call an experienced jeweler who will safely and help you resize it back for use.